How to Tie a Knot for Threat

Some people abandon sewing altogether in the initial days of starting sewing, just like my daughter did. She got frustrated at simple things like threading a needle, being unable to knot the thread and major things like the sewing machine tangling all the thread in the spool.

In Sewing, such frustrations come up all the time. If you are passionate, you brush away these irritations and carry on.

Making a thread knot is the easiest of things and at the start of sewing or embroidery, does the simple job of locking the stitches from getting undone. But, If you do not want a knot anywhere near your sewing – it is understandable, knots are knobby and somewhat displeasing to the eye (Understatement of the year). There are many simple ways of anchoring your hand sewing stitches – with knots and without knots.

1. Make a knot with fingers

When you have been sewing for a long time you can make these knots in your sleep. But to explain the twirls needed for making this knot is difficult – but it goes like this.

You take the end of the thread and make two or three loops around your right hand pointing finger, then using your thumb, twirl it in the pointing finger itself so that the loop mix up. Now ease the loops out of the finger and then pull the thread to tighten the knot.

But if this one sounds difficult move onto the next method – this one has no gymnastics with fingers.

2. Make a Knot with bullion knot twirls

If the finger twirl seems beyond you, try this very easy method

Thread your needle and bring the thread end to face the eye of the needle as in the picture below.

threading the needle

Twirl the thread over the needle two or three times.

easy way to thread a needle

Ease the twirls or coils slowly down the thread and it will tighten as you go down.

easy way to thread a needle

There you have your knot.

how to thread a needle

3. Make locking stitch

This method does not make any knot but makes a tacking stitch -this is made the way a tailor's tack stitch is made.

Take up two or three threads with your needle; come again at the same place and take up two thread at the same place  – this time making a loop; do not tighten this loop- leave it as it is.

Bring up the needle through this loop  – now tighten the thread.

You will have made a secure stitch. Make one more to secure it more. Cut thread tail

4. Make loop knot stitch

This is another favourite for anchoring thread without a knot

To make this stitch first fold your thread by the middle.

sewing knot

Thread your needle with the thread tails – with the fold on one side – the thread tail is kept as a shorter side

making thread knot

Now take up the needle through the fabric

thread knot

Without withdrawing the whole thread out, insert and bring up the needle through the fold of the thread

Tighten – your thread is nicely anchored there. Carry on with your sewing or embroidery.

sewing knots

5. Make a double back stitch

If you dislike the knot on the backside of your work and want an easy way to secure the thread, just make double back stitches where you start. Learn how to do a back stitch here.

Related post: 10 different ways to tie knots ; 6 Knot stitches in embroidery ; Hand sewing Basics ; 9 Basic Hand stitches.

AUTHOR : Hi, I am Sarina. I am passionate about clothes, sewing, fabrics, fashion and surface design techniques in no particular order and absolutely love writing about all of these including what I learn, what I experience, and what I have bought to do all these. You are more than welcome to stay here and learn with me.

How to Tie a Knot for Threat

Source: https://sewguide.com/sewing-thread-knot/

0 Response to "How to Tie a Knot for Threat"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel